|
|
Post by Dan W. on Mar 8, 2016 21:21:51 GMT -8
Placeholder....
|
|
|
|
Post by Ian on Mar 12, 2016 8:58:57 GMT -8
For anyone that didn't have it. Here was the Chicagoland setup. I'm going to try to look at it today. We got friends in town (joys of being in Vegas i guess) so it won't be tonight. Possible Sunday after work as well. But it it will be locked in on Monday so you all can get some laps in Monday night. If anyone makes adjustments to make it better, leave it here . Thanks  close race.svm (3.51 KB) |
|
|
|
Post by Joe T. on Mar 13, 2016 8:11:21 GMT -8
I like it just as it is.
|
|
|
|
Post by Ian on Mar 14, 2016 11:12:12 GMT -8
Made couple minor adjustments. Tune is on server. Let me know if still feels good. Otherwise will change back later tonight when i get home from work. Thanks
Sent from my SM-N900P using proboards
|
|
|
|
Post by Joe T. on Mar 14, 2016 11:31:57 GMT -8
I have complete faith in your expertise and am sure its fine just the way you have it!  |
|
|
|
Post by Matt E. on Mar 15, 2016 8:18:07 GMT -8
It seems like it might need some tightening up to me. I'm quickly burning up the RR as well as the RF.
|
|
|
|
Post by Ian on Mar 15, 2016 9:30:44 GMT -8
Both sets do it ( including original we ran before). The last adjustment was just to stabilize the car a little bit more. It's just a slight air pressure, touch of wedge out and a touch of camber out cause insides were burning up.
Sent from my SM-N900P using proboards
|
|
robbmc
Wheel Changer
To finish last, first you have to finish...
Posts: 151
|
Post by robbmc on Mar 15, 2016 10:29:26 GMT -8
Where are you working now Ian?
|
|
|
|
Post by David M on Mar 15, 2016 10:45:35 GMT -8
First off I apologize I have had absolutely no time to test this week I've been super busy
Unfortunately I agree setup is way too loose center off as is.
But I did some testing and I came up with what I believe to be a quick fix. All I did was raise LR spring to 420 and lower RR spring to 350 but for me both right side tires were wearing evenly and it wasn't getting so loose from the center off. Attachments:XFchicago.svm (3.51 KB)
|
|
|
|
Post by Joe T. on Mar 15, 2016 11:07:34 GMT -8
"Unfortunately I agree setup is way too loose center off as is."
Loose must mean something other than what I am thinking...
When I ran around the track with the original setup from the last race I was able to hold it to the floor in 4th gear what must have been 90% of the entire track.
Having said that, I am still .9 seconds off the fastest lap but certainly never had any control issues.
With my limited skill I like it "glued to the track" which I think is the opposite of loose. ?
But as you know there is a whole lot I don't know about this stuff.
Joe.
|
|
|
|
Post by Jeff H. on Mar 15, 2016 12:47:25 GMT -8
Yeah it is really loose. I can barely half throttle off the corners or it goes around.
|
|
|
|
Post by Ed D on Mar 15, 2016 13:07:11 GMT -8
I was up a couple of hours ago. Very loose, especially entering 3. very frustrating, I threw in the towel. Was a second quicker running the cup default setup.
|
|
|
|
Post by Dan W. on Mar 15, 2016 14:24:17 GMT -8
Setup wont matter to me, not going to make the race. Have to head back to the shop after dinner, got a hot one that needs to be finished by noon tomorrow.
So someone save me a replay.
|
|
|
|
Post by Ian on Mar 15, 2016 15:41:49 GMT -8
Ok will do Dan
Sent from my SM-N900P using proboards
|
|
|
|
Post by Ian on Mar 15, 2016 15:42:47 GMT -8
Wth ..ok maybe it never took...eesh. I'll just put the one we ran last time on. Do that in an hour.
Sent from my SM-N900P using proboards
|
|
