|
|
Post by Dan W. on Dec 15, 2014 14:05:53 GMT -8
 This shows where we want the SPAZCAR decal, it can be left or right, or both. I had to add a stroke to this so it would show up, feel free to do the same in what ever color suits your paint, also the logo has to be shrunk, on PS I scaled it to 25 from 100. Side ones are same size.  This picture shows where to put the AMD decals and the spazcar logo. The AMD decals go on the door pillar, spazcar goes at the bottom in front of rear tire on both sides. AMD decals are scaled down from 100 to 8, then I stacked them and merged them as one. FX decal goes on top. Once scaled down and merged, rotate to 8 for drivers side and -8 for passengers. you may have to tweak these setting depending on make of car. Forgot to mention I use the 2048 x 2048 template, so if you use the 1024 x 1024, the scale will be different I'm sure. DECAL & SPONSOR Pack DL: Sponsors.rar |
|
|
|
Post by Dan W. on Jan 8, 2015 20:01:57 GMT -8
# and name rules for cars.
It will be mandatory that #'s are on both doors, the roof and front (passenger side on or around the headlight) and back (passenger side on or around the tail light).
And drivers name on both sides of the roof. (and the windshield banner if possible, Cup car only I think.)
Door #'s must be at least 3/4 as tall as the door.
Roof # must be at least 2/3 of the roof size and bottom of # must face drivers side of car.
This and the mandatory SPAZCAR and Sponsor decals from the OP will be used on all participating cars. Only exception is a stock skin.
So don't finalize any paints until Ian has time to decide on placement of Decals as mentioned in the OP. Everything is here, so get'em done and send them to me. You have until the 1st of September.
|
|
|
|
Post by Dan W. on Aug 12, 2015 5:53:11 GMT -8
Working on the AMD and SPAZCAR sponsor placement now, if it works as we want, I will post a couple picks of how we want it.
And I'll post the .psd's of the decals for those that don't have them. Give me till Friday at the latest.
Done..
|
|
|
|
Post by Dan W. on Aug 12, 2015 7:22:37 GMT -8
OP updated with pics and link, get to work guys.
|
|
|
|
Post by Ian on Aug 12, 2015 16:45:11 GMT -8
I'm good with this..break out the spray guns  Sent from my SM-N900P using proboards |
|
